E-COATING - ThermalShield UltraFlex

ReHarmony E-COATING - ThermalShield UltraFlex is a specialized coating designed for exterior walls, offering exceptional elasticity, durability, and decorative effects.

It effectively adapts to structural movements, providing crack resistance, superior waterproofing, and long-term weather resistance. With a low-VOC and eco-friendly formula, this product is ideal for residential, commercial, and industrial buildings, ensuring both protection and aesthetic appeal.

Product Specifications

Long-Lasting Cooling Performance

High Elasticity and Crack Resistance

Feature

Eco-Friendly and Decorative

Superior Weather and Waterproof Performance

Surface Preparation Technical Requirements

Base Cleaning

• Remove dust, oil stains, and loose particles using brooms/scrapers. Degrease oily areas with specialized cleaners.

• For old walls: Strip peeling coatings; treat mold with antifungal solution before cleaning.

Surface Repair

• Fill holes/cracks with putty. Reinforce large cracks with elastic filler or fiber tape before patching.

• After drying, sand smooth (≤2mm flatness tolerance).

Uniform Sanding

• Sand entire surface to moderate roughness for optimal paint adhesion.

• Maintain even pressure to avoid scratches; remove dust with a clean cloth.

Pre-Coating Inspection

• Verify surface flatness, verticality, and corner straightness; check for cracks/pinholes.

• Test substrate: pH <10, moisture content <10%.

• Color: White

• Composition: Polymer emulsion, pigments/fillers, additives, water

• Application Methods: Brush, roller, or spray

• Coverage: 5–6 m²/L (two coats)

• Dilution: ≤15% water addition

• Film Thickness: 0.1–0.3 mm

• Drying Time (25°C, 50% RH): 24–72 hours

• Recoat Time (25°C, 50% RH): 24–48 hours

• Solid Content: 50–70%

• Shelf Life: 12–18 months

• System Recommendations: Primer, putty, sandpaper, application tools

Actual consumption and coverage may vary depending on application method, surface porosity/roughness, and environmental conditions.