ReHarmony E-COATING - ThermalShield MidFlex

E-COATING ThermalShield MidFlex is a high-value, environmentally friendly water-based coating specifically designed for metal components such as steel structures and scaffolding. This product is diluted with water, making it easy to apply, non-toxic, non-flammable, and safe for both users and the environment.

It offers a one-year lifespan for corrosion protection and exhibits excellent weather resistance, making it suitable for various indoor and outdoor environments. This paint effectively extends the lifespan of metals, making it an ideal choice for short-term metal protection.

• Color: White

• Composition: Polymer emulsion, pigments/fillers, additives, water

• Application Methods: Brush, roller, or spray

• Coverage: 5–6 m²/L (two coats)

• Dilution: ≤15% water addition

• Film Thickness: 0.1–0.3 mm

• Drying Time (25°C, 50% RH): 24–72 hours

• Recoat Time (25°C, 50% RH): 24–48 hours

• Solid Content: 50–70%

• Shelf Life: 12–18 months

• System Recommendations: Primer, putty, sandpaper, application tools

Actual consumption and coverage may vary depending on application method, surface porosity/roughness, and environmental conditions.

Product Specifications

Long-Lasting Cooling Performance

Superior Elasticity and Crack Resistance

Feature

Exceptional Waterproof Performance

Environmentally Friendly and Health-Conscious

Surface Preparation Technical Requirements

Base Cleaning

• Remove dust, oil stains, and loose particles using brooms/scrapers. Degrease oily areas with specialized cleaners.

• For old walls: Strip peeling coatings; treat mold with antifungal solution before cleaning.

Surface Repair

• Fill holes/cracks with putty. Reinforce large cracks with elastic filler or fiber tape before patching.

• After drying, sand smooth (≤2mm flatness tolerance).

Uniform Sanding

• Sand entire surface to moderate roughness for optimal paint adhesion.

• Maintain even pressure to avoid scratches; remove dust with a clean cloth.

Pre-Coating Inspection

• Verify surface flatness, verticality, and corner straightness; check for cracks/pinholes.

• Test substrate: pH <10, moisture content <10%.